Chapter 1 Introduction

1.2 Introduction on engineering drawings随堂测验

1、Please select different drawings used in civil engineering
    A、Multi-plane orthogonal projection drawings
    B、Perspective projection drawings
    C、Oblique projection drawings
    D、Elevation projection drawings

test-1

1、The projection methods do not include
    A、central projection method
    B、perspective projection method
    C、parallel projection method
    D、inclined projection method

2、The advantage of multi-plane orthogonal projection drawing is
    A、good cubic effect
    B、show the 3D shape of the object
    C、easy to draw and understand
    D、show the real shape and size of the object

3、The perspective projection drawing
    A、has good cubic effect
    B、shows the real size of the object
    C、is easy to draw and understand
    D、shows the real shape of the object

4、Engineering drawing is
    A、drawn according to the uniform provisions
    B、technical language in engineering
    C、critical basis for engineering construction
    D、important for both new building and repairing
    E、not necessary for buildings with the area of less than 1000

5、The civil engineering drawings include
    A、Multi-plane orthogonal projection drawings
    B、Perspective projection drawings
    C、Elevation Projection Drawings
    D、Axonometric Projection Drawings
    E、Parallel projection drawings
    F、Inclined projection drawings

6、The parallel projection method include
    A、Oblique projection method
    B、Orthographic projection method
    C、Elevation Projection method
    D、Multi-plane Projection method

7、Engineering drawings are drawn according to the uniform provisions of the national, departmental and regional standards.

8、Multi-plane orthogonal projection drawings are most commonly used as schematic drawings .

9、Axonometric projection drawings are more used than perspective projection drawings in civil engineering.

Chapter 2 Unified Standards for Building Drawings and Basic Skills

2.1 Drawing sheet随堂测验

1、The direction of a drawing sheet can be vertical sheet or sheet.

2、For a A0 sheet, the length of the sheet should be mm

3、For a A2 sheet, the width of the sheet should be mm

4、For a A3 horizontal sheet, the binding gap on the left side of the sheet should be mm

2.2 Drawing line随堂测验

1、The two elements of a drawing line are and .
    A、thickness
    B、length
    C、type
    D、color

2、In engineering drawings, there are several line types, including solid line、 、 、 and so on.

3、the ratio between the thickness of the bold line and the thin line is .

2.3 Font and Scale随堂测验

1、The ratio between the height and width of the Chinese character in the drawing is .
    A、2
    B、1.4
    C、0.7
    D、0.5

2.4 Dimension mark随堂测验

1、The dimension mark in the engineering drawing includes 、 、 and dimension figure.

TEST-2

1、What is the area of A3 ?
    A、1
    B、0.5
    C、0.25
    D、0.125
    E、0.625

2、what is the ratio between the width and height of long fangsongti ?
    A、
    B、
    C、0.5
    D、1.0
    E、2
    F、0.25

3、The basic line thickness of the drawing refers to the thickness for the ( ) line
    A、thin
    B、semi-bold
    C、bold
    D、middle

4、The ratio between the height and width of the Chinese character in the drawing is ( )
    A、0.5
    B、0.7
    C、1.4
    D、2

5、The ratio between the thickness of the thin line and the bold line is
    A、4
    B、2
    C、0.5
    D、0.25

6、which of the following requirements for extension line is correct?
    A、it should be draw by bold solid line
    B、about 2 mm from the contour line
    C、a bout 2 mm beyond the dimension line
    D、Other lines in the drawing should not be used as the extension line.
    E、about 2-3mm in length

7、The two elements of a drawing line are ()
    A、line length
    B、line type
    C、line thickness
    D、line scale
    E、line color

8、The latin letters not allowed to use in the civil engineering drawing are:
    A、I
    B、O
    C、Z
    D、L
    E、M
    F、B
    G、E

9、There are two legible Chinese text style in civil engineering drawings:
    A、bold text
    B、long fangsongti text
    C、Songti text
    D、heiti text
    E、Kaiti text

10、The components of dimension mark are:
    A、dimention line
    B、extension line
    C、start-stop symbol
    D、dimention figure
    E、arrow
    F、Arabic number

11、which part in the building should be drawn by bold line?
    A、column
    B、window
    C、wall
    D、shearwall
    E、door
    F、dimension line
    G、start-stop symbol

12、The boundary line of the drawing area is called format line.

13、There are two columns in the drawing format, and the countersign column is in the binding side.

14、If the drawing sheet is not large enough for the drawing, both the long side and short side can be extended.

15、The common used scale for site plan is 1:100.

16、The unit for all the drawings including site plan, architectural construction drawing and structural construction is mm.

17、When the short side of a drawing sheet is located vertically, we name the sheet as a()drawing。

18、The length of A2 sheet is()mm。

19、For a A0 sheet, the length of the sheet should be mm

20、For a A1 sheet, the width of the sheet should be mm

21、For a A4 horizontal sheet, the binding gap on the left side of the sheet should be mm

Chapter 3 Architectural construction drawing

3.1 Drawing list and general construction instruction随堂测验

1、Please list three different buildings named by material

2、Please list the types of structures you know.

3.4 Elevation随堂测验

1、The line width (thickness) of the horizon line in elevation drawing should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

2、The positioning axes in elevation drawing should be ( )
    A、It's not necessary to draw positioning axes
    B、All the primary positioning axes should be drawn
    C、Only the middle positioning axes need to be drawn
    D、Only the start and end positioning axes need to be drawn

3.5 Section随堂测验

1、The line width (thickness) of the cutting symbol should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

2、Please choose the right statment on cutting symbol“┏1”
    A、The cutting position is along the horizontal direction
    B、The projection direction is from the left to the right
    C、The number of "1" means the positioning axis ①
    D、The line width (thickness) of the symbol should be 1.4b

chapter quiz 3

1、The basic line thickness of the drawing refers to the thickness for the ( ) line
    A、thin
    B、semi-bold
    C、bold
    D、middle

2、The ratio between the height and width of the Chinese character in the drawing is ( )
    A、0.5
    B、0.7
    C、1.4
    D、2

3、The ratio between the thickness of the thin line and the bold line is
    A、4
    B、2
    C、0.5
    D、0.25

4、The diameter for the compass in the site plan drawing should be ( ) mm.
    A、8
    B、10
    C、20
    D、24

5、The differences between the first floor plan and the second floor plan drawing do NOT include ( ).
    A、cutting symbol
    B、outdoor steps
    C、stairs
    D、indoor elevations
    E、positioning axes numbers
    F、scale

6、The basic modular equals to ( )mm.
    A、1
    B、10
    C、100
    D、200
    E、300

7、In the floor plan drawings for a building, the relative elevation zero point refers to ( ).
    A、the average sea level of Yellow sea near Qingdao
    B、the average sea level of Yellow river near Qingdao
    C、the elvation of the first floor
    D、the elvation of the outdoor ground
    E、the elvation of the entrance platform
    F、the elvation of the second floor

8、The architectural elements do NOT include ( ).
    A、beams
    B、doors
    C、windows
    D、stairs
    E、walls

9、There are two types of elevation in the general site plan, they are: elevation and elevation.

10、The line type of the axes should be .

11、When the short side of a drawing sheet is located vertically, we name the sheet as a( )drawing。

12、For a A1 sheet, the width of the sheet should be mm

13、In the below drawing, the name of the new designed building is

14、The length of the new designed building is m from east to west.

15、The number for the empty circle between axis 3 and axis 4 should be .

mid-term assignment

1、

Chapter 4 Structural construction drawing

4.1 Introduction随堂测验

1、What is the function of the concrete cover?
    A、To protect rebar from corrosion.
    B、To improve the bearing capacity of the member.
    C、To improve the cohesion force between rebar and concrete.
    D、To improve the fire resistance of the member

4.2-3 Standard for Structural Drawings随堂测验

1、what kind of hook means that the hook does not exist?
    A、45° hook
    B、90° hook
    C、135° hook
    D、180° hook

final exam before 7th July

single choice

1、The ratio between the height and width of the Chinese character in the drawing is .
    A、2
    B、1.4
    C、0.7
    D、0.5

2、what kind of hook means that the hook does not exist?
    A、45° hook
    B、90° hook
    C、135° hook
    D、180° hook

3、The positioning axes in elevation drawing should be ( )
    A、It's not necessary to draw positioning axes
    B、All the primary positioning axes should be drawn
    C、Only the middle positioning axes need to be drawn
    D、Only the start and end positioning axes need to be drawn

4、The line width (thickness) of the horizon line in elevation drawing should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

5、The line width (thickness) of the cutting symbol should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

6、Please choose the right statment on cutting symbol“┏1”
    A、The cutting position is along the horizontal direction
    B、The projection direction is from the left to the right
    C、The number of "1" means the positioning axis ①
    D、The line width (thickness) of the symbol should be 1.4b

7、The ratio between the thickness of the thin line and the bold line is
    A、4
    B、2
    C、0.5
    D、0.25

8、which of the following requirements for extension line is correct?
    A、it should be draw by bold solid line
    B、about 2 mm from the contour line
    C、Other lines in the drawing should not be used as the extension line.
    D、about 2-3mm in length

9、The ratio between the height and width of the Chinese character in the drawing is ( )
    A、0.5
    B、0.7
    C、1.4
    D、2

10、The basic line thickness of the drawing refers to the thickness for the ( ) line
    A、thin
    B、semi-bold
    C、bold
    D、middle

11、In the floor plan drawings for a building, the relative elevation zero point refers to ( ).
    A、the average sea level of Yellow sea near Qingdao
    B、the average sea level of Yellow river near Qingdao
    C、the elvation of the first floor
    D、the elvation of the outdoor ground
    E、the elvation of the entrance platform
    F、the elvation of the second floor

12、The diameter for the compass in the site plan drawing should be ( ) mm.
    A、8
    B、10
    C、20
    D、24

13、The differences between the first floor plan and the second floor plan drawing do NOT include ( ).
    A、cutting symbol
    B、outdoor steps
    C、stairs
    D、indoor elevations
    E、positioning axes numbers

14、The basic modular equals to ( )mm.
    A、1
    B、10
    C、100
    D、200
    E、300

15、The architectural elements do NOT include ( ).
    A、beams
    B、doors
    C、windows
    D、stairs
    E、walls

16、The perspective projection drawing
    A、has good cubic effect
    B、shows the real size of the object
    C、is easy to draw and understand
    D、shows the real shape of the object

17、The advantage of multi-plane orthogonal projection drawing is
    A、good cubic effect
    B、show the 3D shape of the object
    C、easy to draw and understand
    D、show the real shape and size of the object

18、The ratio between the height and width of the Chinese character in the drawing is .
    A、2
    B、1.4
    C、0.7
    D、0.5

19、The projection methods do not include
    A、central projection method
    B、perspective projection method
    C、parallel projection method
    D、inclined projection method

20、what kind of hook means that the hook does not exist?
    A、45° hook
    B、90° hook
    C、135° hook
    D、180° hook

21、The positioning axes in elevation drawing should be ( )
    A、It's not necessary to draw positioning axes
    B、All the primary positioning axes should be drawn
    C、Only the middle positioning axes need to be drawn
    D、Only the start and end positioning axes need to be drawn

22、The line width (thickness) of the horizon line in elevation drawing should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

23、The line width (thickness) of the cutting symbol should be ( )
    A、0.7b
    B、1.0b
    C、1.4b
    D、2.0b

24、Please choose the right statment on cutting symbol“┏1”
    A、The cutting position is along the horizontal direction
    B、The projection direction is from the left to the right
    C、The number of "1" means the positioning axis ①
    D、The line width (thickness) of the symbol should be 1.4b

25、The ratio between the thickness of the thin line and the bold line is
    A、4
    B、2
    C、0.5
    D、0.25

26、which of the following requirements for extension line is correct?
    A、it should be draw by bold solid line
    B、about 2 mm from the contour line
    C、Other lines in the drawing should not be used as the extension line.
    D、about 2-3mm in length

27、The ratio between the height and width of the Chinese character in the drawing is ( )
    A、0.5
    B、0.7
    C、1.4
    D、2

28、The basic line thickness of the drawing refers to the thickness for the ( ) line
    A、thin
    B、semi-bold
    C、bold
    D、middle

29、In the floor plan drawings for a building, the relative elevation zero point refers to ( ).
    A、the average sea level of Yellow sea near Qingdao
    B、the average sea level of Yellow river near Qingdao
    C、the elvation of the first floor
    D、the elvation of the outdoor ground
    E、the elvation of the entrance platform
    F、the elvation of the second floor

30、The diameter for the compass in the site plan drawing should be ( ) mm.
    A、8
    B、10
    C、20
    D、24

31、The differences between the first floor plan and the second floor plan drawing do NOT include ( ).
    A、cutting symbol
    B、outdoor steps
    C、stairs
    D、indoor elevations
    E、positioning axes numbers

32、The basic modular equals to ( )mm.
    A、1
    B、10
    C、100
    D、200
    E、300

33、The architectural elements do NOT include ( ).
    A、beams
    B、doors
    C、windows
    D、stairs
    E、walls

34、The perspective projection drawing
    A、has good cubic effect
    B、shows the real size of the object
    C、is easy to draw and understand
    D、shows the real shape of the object

35、The advantage of multi-plane orthogonal projection drawing is
    A、good cubic effect
    B、show the 3D shape of the object
    C、easy to draw and understand
    D、show the real shape and size of the object

36、The projection methods do not include
    A、central projection method
    B、perspective projection method
    C、parallel projection method
    D、inclined projection method

blank-20%,Q&A-10%,reading-30%,drawing-20%.

1、1. In engineering drawings, there are several line types, including 、 、 、 and wave line. 2. According to the professional contents and functions, the construction drawings of the buildings include 、 and equipment construction drawing. 3. According to the types of bearing structures, the buildings can be divided into 、 、 、 frame-shear wall structure and tube structure. 4. The value of basic module should be , and 5M is mm. 5. There are two types of elevation in the construction site plan, they are: and . 6. The dimension mark in the engineering drawing includes 、 、 and dimension figure. 7. For ichnographic construction drawings of beams, there are two methods, such as ichnographic annotation method and ; Ichnographic annotation method of beams includes and . 8. In the ichnographic construction drawings of foundation, the “DJ” represents that the type of foundation is .

2、III、Questions(10 points) 1. Please illustrate the drawing process of first floor plan.(5 points) 2. Please simply list the content of specific annotation of beam. (5 points).

3、IV. Drawings Reading (30 points,1 for each blank)

4、V. Drawing (20 points)